Fax: 765-423-4111 . www.lafayetteinstrument.com . E-mail: [email protected]
Model 09494 User’s Manual
3
3
OVERVIEW:
The 09494 editing system provides simple SVHS editing for the sports and general A/V professional.
It consists of a handheld signal source (Bearclaw remote) and a signal detecting VCR controller
(Cutup Editor) that provides all the functions for producing edited SVHS and VHS tapes. The
Bearclaw remote provides audio signals to a camcorder, docking deck camera, VCR or directly to the
Cutup Editor to mark video segments (plays) with. There are 5 audio signals (“tones”) from the
remote. Four of the five are used to separate categories during recording. The fifth “tone” is for a
“skip over” or don’t record function (i.e. to mark a halftime show not wanted on any report tape). The
audio signal is detected by the Cutup Editor and switches a corresponding VCR to record while its
“tone” is present. Each tone can represent a category of your choice (i.e. Offense, Defense, Kickoff, or
Punt). The system does not require computers or software, and can be tailored to your specific needs
by choosing what a tone represents. The Cutup Editor includes a S-video and composite video
distribution amplifier with automatic detection and switching of video between the composite and S-
video input and four outputs of both S-video and Composite video.
Cutup Editor
Inputs:
Video
Composite video: 1 VP-P, 75 ohms terminated BNC
S-video: Y 1 VP-P, C .386 VP-P, 75 ohms terminated 4-pin miniDIN
Audio: Tone input 1 VP-P, 10 kilohms input impedance, unbalanced
Outputs
: Video
4—Composite video: 1 VP-P, 75 ohm terminated BNC
4—S-video: Y 1 VP-P, C .386 VP-P 75 ohm terminated 4-pin miniDIN
Control
: VCR
4—Serial port for Panasonic 5-pin remote VCR’s
Supported Recording VCR’s
:
Lafayette—09950, 09948, 09945, 09958, 09970, 00885
Panasonic—AG-1950, AG-1960, AG-1970, AG-7400, AG-2400,
AG-460
Power required
: 120 V AC 50/60 Hz 5 Watts
Dimensions
: 17.2” x 12.5” x 3.7”
Accessories included
:
•
1—AC cord, 5 ft.
•
4—5-pin edit cables, 4 ft.
•
1—RCA/BNC adapter
•
2—Rack mount adapter bracket with screws
SPECIFICATIONS: