3700 Sagamore Parkway North . PO Box 5729 . Lafayette, IN 47903 USA . Ph: 765-423-1505
ELECTRONIC VOICE REACTION TIMER
6
6
6.
7.
8.
1.
2.
Regardless of which relay is chosen to be adjusted, the next screen to appear on the LCD is
the following;
DELAY = 0.500S
INC DEC OK
The delay period can now be incremented in 10 millisecond steps by pressing the
INC
button.
The maximum delay is 2.000 seconds. Conversely, the delay period can be decremented in 10
millisecond steps by pressing the
DEC
button. The minimum delay is 0.000 seconds. When
the delay is set to the desired period, pressing the
OK
button will bring the user back to the
previous screen, where the other relay may be selected for adjustment or the
OK
button can be
pressed and testing may begin. When the
INC
or
DEC
button is pressed and held, the delay
value will change at a moderate rate for the first five values and then change at a much faster
rate until the button is released.
In this mode of operation Relay 3 is not used.
Pressing the Quit button will cause the unit to exit this mode and return to the main
configuration selection screen.
Non-latching/Non-sequential Mode
When in this mode of operation any trigger input from either microphone will cause it's
corresponding relay to close for the time determined by the delay period.
The same testing screen as for the Non-latching/Sequential Mode is displayed and the
selection menu responds in the same manner.