Lafayette Instrument Economy Clock/Counter
3700 Sagamore Pkwy N Lafayette, IN 47904 . Tel: (765) 423-1505
6
Examples
Hole Type Steadiness Tester Settings
•
RUN:
NO
NC
•
START:
NO
NC
•
STOP:
NO
NC
•
RESET:
NO
NC
•
TONE:
OFF
ON
(either is acceptable)
•
START:
SNGL
REP
Connect a Lafayette Instrument Model 32011 binding post to any ground port of the 54060A.
Connect the stylus to the run input port of the 54060A. Keep the default settings as all
contacts Normally Open. The data recorded will show the number of times the subject
touches the side of the hole and the total amount of time the subject is in contact with the
side of the hole.
Switchmat Settings
•
RUN:
NO
NC
•
START: NO
NC
•
STOP:
NO
NC
•
RESET:
NO
NC
•
TONE:
OFF
ON
•
START:
SNGL
REP
For a 40 yard dash, connect the Lafayette Instrument Model 63516 black wire to any ground
port of the 54060A. Connect the red wire to the Start input of the 54060A. The Stop input on
the 54060A should be wired to the red binding post of the 63502IR, while the black binding
post of the 63502IR should be wired to any other ground port of the 54060A. When the
runner steps off of the switch mat, the clock begins to run until the runner initiates the Stop
input by crossing the designated line.
