laerdal SimPad, Directions For Use Manual

Page: 23 / 36

22 23
English
LAERDAL LAERDAL LAERDAL
SimPad
L A E R D A L
LAERD
AL
Battery 1
Battery 2
LAERDAL LI-ION BATTERY
It is possible to connect two Laerdal Li-Ion batteries to the
Link Box.
When the Link Box is powered on, the batteries are discharged
in parallel. The remaining capacity in each battery will be displayed
in the SimPad.
BATTERY CHARGING
The batteries can be charged through the Link Box when the Link Box power is turned off and
the Link Box is connected to the AC adapter.
During charging, the Link Box ON indicator will blink with a yellow light, and the LED indicators
on the batteries will show a steady yellow. When the batteries are fully charged, voltage to the
batteries will be turned off and the indicator on the Link Box will show steady yellow.
Alternatively, a battery can be charged by connecting it directly to the AC adapter.
During charging, the LED indicator on the battery will show a steady yellow. When the battery
is fully charged, the LED indicator shows steady green.
WARNINGS:
Do not use the Laerdal Li-Ion Battery for other purposes than specified.
Use only the AC charger adapter supplied with the product.
Do not use the battery in temperatures above what is specified in this Directions for Use.
Do not heat or incinerate. Do not crush the battery. Do not short circuit the battery contact.
Do not immerse in water. The battery must be recycled and disposed of in accordance with
local rules.