laerdal SimMan ALS, User Manual

Page: 40 / 44

Cleaning
40 40
Cleaning Simulator
1. Clean with mild soap and water; do not submerge the simulator or parts in cleaning
fluids or water.
2. Use only on clean surface. Avoid felt tipped markers, ink pens, acetone, iodine or
other staining products and avoid placing the simulator on newsprint or inked lines of
any kind.
3. To ensure longevity, each simulator should be cleaned after each training session and a
general inspection should be conducted regularly.
4. Modules and all other parts should be drained and air-dried thoroughly before
storage and disinfected when needed. After use of injection pads (use water only),
accumulated water should be squeezed out.