laerdal Resusci AnneSimulator, Manual

Page: 17 / 84

16 17
Maintenance
16 17
Maintenance
Ventilation
•
Lubricate airway with two or three sprays prior to starting your training session.
• Lubricate airway management tools liberally prior to starting intubations. Consider whether
additional lubrication is needed later in the session.
•
Use only lubrication provided. Do not use silicon or other lubricant, as this may damage manikin.
Note
Head contains electrical components. Due to inability to sanitize airway, mouth-to-mouth/
mouth-to-mask ventilation should not be performed.
BP arm assembly and disassembly
For transportation using hard case you must disassemble BP arm.
To reassemble, reverse procedure.
Ensure grooves on bolt fit properly into hole on torso.
Reattach chest skin.
Press grooves to
release arm and
expose cable.
Detach cable.
Remove arm.
English