375-70001
Laerdal
7
Care and Maintenance:
1. Clean with mild soap and water; do not submerse
manikin or parts in cleaning fluids or water.
2. Use only on clean surface. Avoid felt tipped
markers, ink pens, acetone, iodine or other staining
products and avoid placing the manikin on
newsprint or inked lines of any kind.
3. To ensure longevity, each manikin and module
should be cleaned after each training session and a
general inspection should be conducted regularly.
4. Modules and all other parts should be drained and
air-dried thoroughly before storage and disinfected
when needed. After use of injection pads (
use water
only
), accumulated water should be squeezed out.
Do not store wet foam pads in the skin.
To
prevent mildew or mold, pads can be soaked in a
mild solution of disinfectant and water or bleach and
water. Squeeze excess solution from pads, allow
them to dry, then store or reinsert in manikin.
5. Articulating parts will benefit from a light application
of talcum powder prior to training sessions.
6. Store properly between teaching sessions.
Warranty
Laerdal Medical warrants to the purchaser that its
products are free from defects in material and
workmanship for a period of one (1) year from the date
of purchase by the original user. During the designated
one (1) year period, Laerdal Medical will, upon receipt
of a product found to be defective due to materials or
workmanship from the purchaser and notification in
writing of the defect, at its option repair or replace any
parts found to be defective or the entire product.
Warranty period does not renew with replacement or
repair of original product.
Products found to be defective and notification of
defects may also be sent to the authorized Laerdal
Medical dealer from whom the product was purchased.
All postage, shipping or handling charges shall be the
sole responsibility of the purchaser.
Laerdal Medical is responsible for the effects of safety,
reliability and performance of its product(s) only if:
