4.1 Getting Started
Note:
Read all the Cautions and Warnings listed in section 1
thoroughly before you use the LSU.
1. Check that no parts are missing and that all parts are clean.
2. If you decide to operate the LSU from external power, connect
either external AC- or DC-power to the LSU as described in
section 3.4. If decide to operate the LSU from internal battery, check that
battery is installed.
3. Ensure the Patient Suction Tubing is securely connected to the PATIENT
Inlet on the Canister Lid.
4. Check that a suction catheter is attached to the patient suction tube or
suction adapter. Do not use the suction tube or suction adapter without
a suction catheter attached. Proceed as follows:
5. Release the Patient Suction Tubing by releasing the Strap.
6 The LSU should be operated in the upright position to prevent overflow
of suctioned material.
7. Set the Operating Knob to the required vacuum level, and the LSU will
automatically be switched ON and start to operate. The green Power
ON Indicator is continuously lit while the LSU is
switched ON.
14
4. Operation
LSU DfU US 6791 rev H.indd 14
30.09.2016 14:39:51