13
Settings
14
www.LAEGENDARY.com
SETTINGS
Image 18
LGD240 DUAL
Step 1. Enter the Menu. Select Settings (Image 18), into set
interface (Image 19-21)
In this menu you can set the cutoff input voltage of the power
supply of the charger to protect your power supply. The
charger will cutoff when input voltage is lower than the setting
value. Range from 11.0-18.0V. Default: 10.0V
In this menu you can set the charge power limit to meet your
power supply. The charge will work under the setting value.
Balance control of LiPo/LiIo/LiFe/LiHV – you can set the balance control to meet your
demand. Normal/Fast/Slow – optional. Default: Normal
*Fast: Fastest balance speed – less accurate.
*Slow: Lowest balance speed – more accurate.
*Normal: balance speed and accurateness between Fast and Slow.
Set the volume of the buzzer. Keep Beep default:
Middle, Low/Middle/High/Off optional
Image 19
Image 20
In this menu you can set the cutoff internal temperature to
protect your battery. The charger will stop working when the
internal temperature is higher than the setting value range
from 30-85°C. Default: 80°C.
In this menu you can set the cutoff capacity to protect your
battery. The charger will stop working when the capacity is
more than the setting value.
Range from off – 65.0Ah. Default: 10.0Ah.
Image 21
In this menu you can set the cutoff external temperature to
protect your battery. The charger will stop working when the
external temperature is higher than the setting value
(an external temperature sensor is needed). Range from
30-85°C. Default: 60°C.
In this menu you can set a safety time to protect your charger
and battery. The charger will stop working when the safety
time is over the setting value. On/Off- optional. Range from
1 to 600 minutes. Default: 240 minutes.
