Ladner dirty dragon, Owner'S Manual

Page: 6 / 11

Dirty Dragon Guitar Amplifier Owner’s Manual
PAGE 6
1
2
3 4
Rear Panel
1 – FUSE- This is the line fuse for the amplifier. The proper fuse should be installed as
indicated on the rear panel of the unit. The table below shows the proper fuse to
be used with the indicated line voltage. NOTE: Failure to install the proper fuse
based on the line voltage noted can result in personal injury, fire, damage to the
amplifier or other nasty things too numerous to mention here.
2 - AC POWER – an IEC standard removable power cable. The unit should only be
plugged into a proper AC Line Voltage as indicated on the rear panel of the unit.
4 – POWER SELECT – Power OutPut selector Full or Half – This selector should only be
changed when the unit is in the STANDBY or OFF position ONLY!!!
3 – SPEAKER OUT - ¼” jack that delivers the amplifiers output signal to a speaker
cabinet.
LINE VOLTAGE FREQ FUSE FUSE TYPE
120 VAC 50/60 Hz 1 A AGC
230 VAC 50/60 Hz 0.5 A AGC