Lacunza Nickel 1000 DC, Instruction Book

Page: 9 / 28

INSTRUCTIONS FOR THE INSTALLER 8
2.
•
Make sure that the doors close
properly.
•
Make sure that all moving parts are
fitted in place.
2.3.4. Height adjustment and levelling the
appliance
The appliance must be perfectly level,
horizontally and vertically, both at the
front and on the sides (use a spirit level).
The appliance has adjustable legs with
which to adjust its height.
The legs can be adjusted using a 24mm
spanner.
2.3.5. Casing
Make sure that the material around the
appliance is not flammable or likely to
deteriorate as a result of heat (wallpaper,
carpet, plastic-based casing, Silestone,
etc.).
The image below gives an example of
how the appliance can be encased
properly:
Figure No.6 - Interior diagram of the
casing
Key to casing diagram:
1 Ceiling
2 Flue
3 Incombustible material (Inner hood
insulation)
4 Insulating deflector made of
incombustible material
5 Wall
6 Fresh-air inlet (1,000 cm
2
)
7 Hot-air outlet (1,000 cm
2
)