617-1392B/617-1392W www.lacrossetechnology.com/support
Page | 2
Get Started
1.
Insert 2 new AAA Alkaline batteries (not included) into the
alarm clock. Observe the correct polarity.
Restart: If there is no indoor temperature data after 60
seconds, remove batteries from the alarm clock, press any
button 20 times. After 15 minutes, start again.
Set Time, Date, etc.
1.
Hold the TIME SET button for 5 seconds, to enter time set
mode.
2.
Press the
▲
or
▼
buttons to adjust values.
3.
Press the TIME SET button to confirm adjustments and
move to the next item.
Setting Order:
1.
RCC time signal (On/Off)
2.
12/24 hour time format
Note: 12-hour time = Month/Date display
24-hour time = Day/Month display
3.
Time Zone - 4 time zones
4.
Hour
5.
Minutes
6.
Year
7.
Month
8.
Date (day of the week sets automatically)
9.
DST (Daylight Saving Time On/Off)
10.
Fahrenheit/Celsius (°F or °C)
Press the TIME SET button to exit, or wait 15 seconds without
pressing buttons to return to the normal time display.
Date Display
The date may be displayed as the Month/Date format or as the
Date/Month format.
P
Pacific
M
Mountain
C
Central
E
Eastern
