La Crosse Technology, Ltd.
Page 5
HUMIDITY SHOWS OFL BUT TEMPERATURE WORKS
The humidity low range is 10% RH. If your local humidity is below 10% you will
see this reading.
Complete a restart with fresh batteries.
Replace the thermo-hygro sensor.
FAHRENHEIT/CELSIUS
Enter the program menu to select in Fahrenheit (ºF) or Celsius (ºC).
MIN | MAX TEMPERATURE/HUMIDITY RECORDS
The station automatically resets MAX and MIN values daily at midnight
(12:00 AM).
Press the UP arrow button once to view MAX indoor/outdoor temperatures.
Then, hold the UP arrow button to manually reset MAX temperatures to current
values.
Press the UP arrow button again to view the MIN indoor/outdoor temperatures.
Then, hold the UP arrow button to manually reset MIN temperatures to current
values.
FEELS LIKE | HEAT INDEX | DEW POINT
Press the HEAT/DEW button repeatedly to toggle between:
o
Feels Like temperature (channel 1 only)
o
Heat Index (outdoor)
o
Dew Point (outdoor)
Note: Feels Like Temperature is the perceived outdoor temperature.
Temperatures below 50°F, will measure the effect of wind speed on
cooling of the human body.
Temperatures above 70°F, will measure the effect of humidity on
the perception of temperature.
Between 51 °F and 69°F, the feels like temperature will be the same as the
outdoor temperature on channel 1.
WIND CUPS SPINNING SLOW OR NOT SPINNING
Check for debris or ice in cups.
Check mounting location. Look for obstructions that prevent the wind from
reaching the sensor.
In most cases, the wind sensor needs to be 4-6ft above the highest point on the
roof in order to clear nearby obstructions and read accurately.
A 50-foot clearance in all directions is best.
Push down firmly on the center of the cups to reseat them.
Cups are replaceable.
