CE ORIGINAL MANUAL
LACROS 1.7 EN
9
How to charge the battery
The battery has one charging point (1) on the right side of
the battery. It is recommended to connect the charger to
the battery first and then insert the 220V plug into the
powersocket. It is better for the battery to recharge after
every ride. The charger will stop charging when the battery
is full. When the battery is full (when the light on the
charger turns green), the charger may be disconnected.
Red (Power on/Charging)
Green (Power off/Full Charge)
Remove battery
The battery can be removed from the battery bay by
pressing the key (1) and turning it to the left, and then gently
pull the battery upwards. Before doing this, remove the
seatpost and saddle from the bicycle.
Always lock the battery when you put it back. The display
cannot be turned on and the battery may vibrate loose while
cycling.
Range
The range represents the distance in kilometers that can be covered with a fully charged battery. The
range is influenced by various factors:
•
Battery capacity (Ah) and voltage (V)
•
Electric support Level
•
The carrying weight on the bike
•
Amount of pedaling power delivered by the rider
•
Ambient temperature (battery capacity decreases below 10°C)
•
Wind force
•
Tire pressure (3.5 bar/50.7 psi)
•
Road surface condition
As the battery ages, the range decreases.
