CE ORIGINAL MANUAL
LACROS AMBLING A200(XL)/A400(XL)
VERSION CE 1.4 EN
12
How to charge the battery
The battery has one charging point (A) on the right side of the battery.
It is recommended to first connect the charger to the battery and then
plug the 220V plug into the socket. It is better for the battery to
connect it to the charger after every cycle. The charger will stop
charging as soon as the battery is full. When the battery is full (when
the light on the charger is green) the charger can be disconnected.
Red (Power on/Charging)
Green (Power off/fully charged)
Removing the battery
The battery can be removed from the battery box by first
turning the key almost (1) 180 degrees to the left, and then
carefully pull the battery back. Ensure that the battery is
always locked when you place it back. The battery may
otherwise vibrate when cycling.
5.
Range
The range represents the distance in kilometers that can be covered with a fully charged battery. The range is
influenced by various factors:
•
Capacity (Ah) and voltage (V) of the battery
•
Level of electrical assistance used
•
The carrying weight on the bicycle
•
Amount of pedaling force delivered by the rider
•
Ambient temperature (battery capacity decreases below 10 ° C)
•
Wind force
•
Tire pressure (3,5 bar/50,7 psi)
•
Condition of the road surface
The range decreases as the battery ages.
