LACOSTE WATCHES
Operating instructions – digital models
A
B
C
D
PM Time
Indicator
Dual-Time
Mode Indicator
Time in Second
Zone: HH:MM
Figure D – DUAL-TIME Mode
LEGEND
A
– EL Backlight/Reset Button
B
– Mode Selection Button
C
– Setting Mode Button
D
– Start/Stop Button
___________________________________________________
To set TIME in Second Time Zone:
1. From Dual-Time Operating Mode, press
C
to enter DUAL-TIME
Setting Mode. Active field will blink.
2. Press
D
to adjust HOURS; then press
B
to advance.
3. Press
D
to adjust MINUTES; then press
B
to advance.
4. Press
C
to confirm settings and return to Dual-Time Operating Mode.
A
B
C
D
Countdown
Timer Settings
Countdown
Mode Indicator
Current Time
in 24H Format:
HH:MM
Countdown
ON Indicator
Figure E – COUNTDOWN Mode
LEGEND
A
– EL Backlight/Reset Button
B
– Mode Selection Button
C
– Setting Mode Button
D
– Start/Stop Button
___________________________________________________
To operate COUNTDOWN timer:
1. In Countdown Operating Mode, press
D
to start/stop countdown.
2. When Countdown stops, press
A
to return display to preset time.
NOTE: When Countdown timer reaches 0, it stops automatically and
Alarm rings for 10 seconds. Press any button to stop Alarm.
To set COUNTDOWN duration:
1. From Countdown Operating Mode, press
C
to enter COUNTDOWN
Setting Mode.
2. Press
B
to advance through COUNTDOWN Setting Sequence:
HOUR
→
MINUTES
→
SECONDS. Active field will blink.
3. Press
D
to adjust the blinking number in each active field; then press
B
to advance.
4. Press
A
to turn Countdown ON or OFF; when activated,
appears beneath Seconds in the Main digital display.
5. Press
C
to confirm settings and return to Countdown Operating Mode.
A
B
C
D
Split Time
Indicator
Stopwatch
Mode Indicator
Figure F – STOPWATCH Mode
LEGEND
A
– EL Backlight/Reset Button
B
– Mode Selection Button
C
– Setting Mode Button
D
– Start/Stop Button
___________________________________________________
In STOPWATCH Mode, this watch functions like a chronograph to
measure intervals of time. Use Buttons
A
and
D
to operate the
stopwatch timer.
To operate STOPWATCH:
1. Press
D
to start timing.
2. Press
D
a second time to stop timing; read elapsed time on Main
digital display.
3. Press
A
to reset display to zero.
To take a SPLIT-TIME reading:
1. Press
D
to start timing.
2. Press
A
to read split time in Main digital display;
appears
beneath Seconds in Main digital display.
3. Press
A
again to resume timing.
4. Repeat steps 2 and 3 to take any additional split times.
5. Press
D
to stop timing.
6. Press
A
to reset display to zero.
