AM/FM Radio:
Press "Standby" button, and use Mode/Dev key to
enter the FM radio mode, the LCD display will indicate AM radio
frequency. Press "PREV/NEXT" to select your desire station. Press
"Mode/DEV" to change AM radio mode. For auto-scan memory
function, press "Auto" on the front panel to start searching and
saving the available radio frequencies. Once the saved radio
frequency is saved. Press "PRE+" or "PRE-" to select programmed
station.
CD-Player:
Press "Mode/DEV" button until LCD display indicate "
----
", then display will show number of songs. For operation use
Start/Pause
(>II)
, Stop, Next
(>>I
), Prev
(I<<)
and volume control.
Press "RPT" once to repeat one song, the REP indication at the top
left corner on the led display will flash. Press "RPT" one more time
to repeat all songs in the track and the REP indication at the top left
corner on the led display will appear. Press "RPT" again to cancel
repeat function.
SD-Player / USB Player:
Press "Mode/DEV" button until led display
indicate
"SD----"
resp.
“USB----“
, then display will show number of
folder, then number of songs. For operation use Start/Pause
(>II)
,
Stop, Next
(>>I
), Prev
(I<<)
and volume control. Press "Next/Prev"
or "F+/-10" to select your desire song. Press "RPT" once to repeat
one song, the REP indication at the top left corner on the led display
will flash. Press "RPT" one more time to repeat all songs in the track
and the REP indication at the top left corner on the led display will
appear. Press "RPT" again to cancel repeat function. To play songs
randomly, press "RPT" button until the led display "RAN" on the
bottom of the display. For programming, press "STOP" button to
stop playback. Press "PROG" to enter programming mode. The led
display will flash and indicate "P 01", select the song that you want
to program and then press "PROG" again. Press "Play/Pause" to
stop programming and start to playback the programmed songs.
This unit can program up to 20 songs.
AUX IN:
you can connect an external audio source to the GA-40 by
using the 3.5mm stereo cable on rear side of device. Switch mode to
„AUX“
E4