Managed Media Converter Chassis System
11 User Manual
System Configuration
Connecting to Power
The chassis system is equipped with two power connectors. When the chassis is
connecting with two powers, you can have the redundant function.
AC power connector DC power connector
AC 100V ~ 240V 2.67A @ 12VDC
Chassis Stacking
The Stacking function allows up to four chassis to be interconnected via their Stacking ports.
This forms a four chassis stack that can then be managed and configured as thought the
entire stack were a single chassis manager. The chassis stack is then accessed through a
single IP address.
The stacking ports are marked
IN
and
OUT
. The RJ45 compliant cable must be connected
from an
IN
port on one Switch to an
OUT
port on the next Switch in the stack. The last two
Switches (at the top and bottom of the stack) must also be connected from the
IN
port on
one Switch to the
OUT
port on the other Switch. In this way, a loop is made such that all of
the Switches in the Switch stack have the
IN
stacking port connected to another Switch’s
OUT
stacking port.
< NOTE > : chassis number is configured using the front panel switch.
