5 INSTALLATION
LACO Technologies
TITAN VERSA Operations and Maintenance Manual
35
Figure 4:
LMSA5981 Solid Relay for use with Local I/O digital outputs
The remote Start/Stop module can be connected to the Local I/O port to provide a
remote connection with the following feaures:
•
Standby Mode
–
Press button to start test cycle.
•
In Mode
–
Press button to end cycle.
Figure 5:
Start/Stop Box (TV118379)
Serial Port
The serial communication serial port (female DB-9) has both RS232 and RS485
protocols available. Table 15 below outlines the pinout for the DB-9 connector. The
following baud rates are available in Communication settings: 9600, 19,200, 57,600
and 115,2000. These can be set at Menu > System > Communications. All
communication follows these additional serial settings:
•
Bits: 8
•
Parity: None
•
Stop Bit: 1
