![background image](http://html.mh-extra.com/html/lacie/rugged-raid/rugged-raid_user-manual_669067015.webp)
Rugged RAID User Manual
15
STEP 1 - CONNECT THE INTERFACE CABLE
First connection
Mac: The LaCie Rugged RAID can be connected to your Mac using the integrated Thunderbolt cable or the
included USB 3.0 cable. However, it is not possible to use both interfaces at the same time.
Windows: For the initial setup, you must use the USB 3.0 cable. If your PC has a Thunderbolt port, make certain
to install the Thunderbolt driver when prompted by LaCie Setup Assistant. Once the driver is installed, you can
connect the Rugged RAID to your PC via Thunderbolt.
Important info on USB 3.0: The power cable must be connected to an active outlet when using the
Rugged RAID’s USB 3.0 port.
Thunderbolt
Remove the cover by placing your index finger on its left edge and gently prying it open. Use caution since
1.
the Thunderbolt cable is held by a fastener on the removable cover.
Gently remove the Thunderbolt connector from the cover.
2.
Unwind the integrated Thunderbolt cable as needed and connect it to your computer.
3.
Summary of Contents for RUGGED RAID
Page 2: ...Rugged RAID User Manual 2 ...