Installation
Router or Hub
IN
OUT
1. Connect the power supply.
2. Connect the Ethernet cable
to the drive and to your local
network (router or hub).
3. Turn on the drive by pushing
and holding the power button
for 2 seconds. When the light
stops blinking, the drive is
ready for use.
Router or Hub
IN
OUT
Power
Button
Note
: If you want to turn off the drive, press and hold the power button for 5 seconds until
the LED blinks. When the LED turns off, the drive has shut down.
Summary of Contents for Network Space MAX
Page 1: ...network space MAX DESIGN BY NEIL POULTON Quick Install Guide...
Page 21: ......
Page 22: ......
Page 23: ......
