LaCie hard disk MAX, Quick Install Manual

Page: 6 / 44

1. Unmount or safely remove the hard disk MAX volumes from your computer and turn off the
hard disk MAX. Make sure the disks are cool before touching them.
2. Insert a small, flat-blade screwdriver into the groove on the RAID selection switch and move
the screwdriver up or down to select a different mode.
3. Turn on the hard disk MAX.
4. Reformat the disks (refer to the User Manual for details).
Changing the RAID Configuration
CAUTION! Changing the RAID configuration mode destroys data stored on the hard disk MAX.
Back up data before following these steps. Before changing the RAID mode, be sure to copy the
User Manual to your computer. If for any reason you lose your User Manual, you can download
it from the the LaCie website: http://www.lacie.com/support/
NOTE: Refer to the User Manual for information on RAID modes.