LaCie Box •
DESIGN BY NEIL POULTON
Setting Up the LaCie Box
User Manual
page 10
5. Gently slide the 3.5” SATA drive, label facing up, onto the
bottom plate until the SATA connector plugs into the LaCie
Box’s internal SATA port (
Fig. 04
). You will feel the connection
rather than hearing an audible signification.
6. Secure the disk drive in the casing by inserting the four screws
(included) as indicated. (
Fig. 05
)
7. Replace the casing by aligning the rear ports with their re-
specitve slots then gently press down on the front until you
hear an audible “click”, indicating closure (
Fig. 06
).
IMPORTANT INFO:
LaCie does not recommend removing the
two bands on the face of the drive. In such an event, please take
great care when separating the top shell from the bottom plate.
Should the need arise, you may gently pull back the plastic face
exactly where it joins to the bottom plate and gently pry the top
away. LaCie is not responsible for any damage caused by sepa-
rating the top and bottom of the LaCie Box in such a manner.
Proceed to section
2.2. Step 2: Connecting to a Computer
.
Fig. 05
Fig. 06
Fig. 04