LaCie 301359U, Quick Install Manual

Page: 6 / 24

1. Unmount or safely remove the 4big Quadra volumes from your
computer, disconnect the interface cable and switch off the 4big.
2. To enter RAID modification mode, push and hold the front button and
simultaneously turn on the 4big. Continue holding the front button for 2 seconds.
3. Push the + or - buttons on the RAID mode selector until the desired RAID
number appears.
4. Validate the mode by pushing
and holding the front LED button
for 2 seconds.
5. Turn off the 4big, allow it to shut
down and turn it back on.
6. Reformat the disks. Please refer to
the User Manual on the LaCie
Storage Utilities CD-ROM.
CAUTION!
- Changing the RAID mode will erase the data stored on the 4big quadra.
Back up data before changing the RAID mode.
- The 4 disk trays must be in place before the RAID mode can be modified.
NOTE:
See the User Manual for information on RAID modes.
Changing the RAID Mode
STEP 3
designed by neil poulton
designed by neil poulton
NOTE: 0=RAID 0, 1=RAID 10,
2=Concatenation, 3=RAID 3,
4=RAID 3+Spare, 5=RAID 5,
6=RAID 5+Spare, 7=N/A .