background image

LaCie 2big Quadra 

• 

DESIGN BY NEIL POULTON

 

Foreword

User Manual 

page 3

 

Only qualified persons are autho-
rized to carry out maintenance on 
this device.

 

Read this User Manual carefully 
and follow the correct procedure 
when setting up the device.

 

Do not open a disk drive or at-
tempt to disassemble or modify it. 
Never insert any metallic object into 
the drive to avoid any risk of elec-
trical shock, fire, short-circuiting 
or dangerous emissions. The disk 

drives shipped with your LaCie 2big 
contain no user-serviceable parts. 
If it appears to be malfunctioning, 
have it inspected by a qualified 

 

LaCie Technical Support represen-
tative.

 

Never expose your device to rain, 
or use it near water, or in damp or 
wet conditions. Never place objects 
containing liquids on the LaCie 
2big, as they may spill into its open-
ings. Doing so increases the risk of 

electrical shock, short-circuiting, 
fire or personal injury.

Health and Safety Precautions

General Use Precautions

 

Power requirements 100-240 V~, 
1.5 A, 50-60 Hz, (supply voltage fluc-
tuations not exceeding ± 10% of the 
nominal and transient over-voltages 
according to over-voltage category II).

 

Do not expose the LaCie 2big to tem-
peratures outside the range of 5° C to 
35° C (41° F to 95° F); or to opera-
tional humidity beyond 5-80%, non-
condensing, or non-operating humid-
ity beyond 10-90%, non-condensing. 
Doing so may damage the LaCie 2big 
or disfigure its casing. Avoid placing 
your LaCie 2big near a source of heat 
or exposing it to sunlight (even through 
a window). Inversely, placing your La-
Cie 2big in an environment that is too 
cold may damage the unit.

 

Rated cooling for altitudes up to 2000 
meters.

 

Always unplug the LaCie 2big from 
the electrical outlet if there is a risk of 
lightning or if it will be unused for an 
extended period of time. Otherwise, 
there is an increased risk of electrical 
shock, short-circuiting or fire.

 

Use only the power supply shipped 
with the device.

 

Do not use the LaCie 2big near other 
electrical appliances such as televi-
sions, radios or speakers. Doing so 
may cause interference which will ad-
versely affect the operation of the other 
products.

 

Do not place the LaCie 2big near 
sources of magnetic interference, such 
as computer displays, televisions or 
speakers.

 

Magnetic interference can affect the 
operation and stability of your LaCie 
2big.

 

Never use excessive force on your 

 

LaCie 2big. If you detect a problem, 
consult the Troubleshooting section in 
this manual.

 

Protect your LaCie 2big from exces-
sive exposure to dust during use or 
storage. Dust can build up inside the 
device, increasing the risk of damage 
or malfunction.

 

Never use benzene, paint thinners, 
detergent or other chemical products 
to clean the outside of the LaCie 2big. 
Such products will disfigure and dis-
color the casing. Instead, use a soft, 
dry cloth to wipe the device.

 

Please replace defective hard drives 
only with a new drive provided by La-
Cie. For drive removal process, see 
section 

3.3. Removing and Installing 

Drives.

 

If ambient temperatures exceed Over 
30° C (86° F), LaCie recommends not 
stacking or racking more than two 
2big Disks on top of each other, es-
pecially if these drives are turned on 
simultaneously.

Summary of Contents for 301258U - 2big Network NAS Server





































Reviews: