LaCie d2 DVD
±
RW Drive
User Manual
page 19
Getting Connected
LaCie Ltd.
XXXXXX
Serial Number XXXXXXXXX
ON
OFF
2.4. Connecting the FireWire 400 Cable
1. Connect the power supply cable (see section
2.2.
Connecting the Power Supply
).
2. Connect the FireWire 400 cable to a FireWire 400
port on the back of the drive (
Fig. 03
).
3. Attach the other end of the interface cable to an
available FireWire 400 port on your computer (
Fig.
04
).
4. Your drive should now be ready for use. To verify that
your drive is correctly installed and communicating
with your computer, follow these steps:
Mac Users
In the Apple menu, click on
About This Mac
, then
More Info
. This will open the Apple System Profiler.
Your drive should be listed in the
Hardware
category.
Windows Users
Right click your My Computer folder and select
Properties
. Click on
General
. Your drive should be
listed.
TECHNICAL NOTE:
For more information
on USB connections, see the following sections:
❖
1.4. Cables and Connections
❖
4.4. FireWire Questions & Answers
Fig. 03
Fig. 04