Controls:
All Toggle switches will illuminate red when
their associated function is active
.
2
INPUT:
Drives more or less
current into the tube stage.
OUTPUT:
Drives more or less cur-
rent into the cleaner output stage.
48V:
Supplies 48 volts of DC
current for condenser micro-
PAD:
Reduces microphone input
signal by 20dB.
POLARITY:
Reverses the polar-
ity of the output signal
INPUT:
Activates Hi-Z or
Microphone input jacks.
HIGH:
Frequency sweep range:
2.5Khz to 20Khz.
MID:
Frequency sweep range:
325hz to 5Khz.
LOW:
Frequency sweep range:
30hz to 400hz..
Each frequency band has
a cut/boost potential of
+ or - 8dB.
PRE + EQ:
In this mode, the EQ section is internally
routed to serve the preamp’s output signal; effected
signal is sent out the left bay output jack.
Independent EQ:
In this mode, the EQ section is available
as a completely independent module. The corresponding
rear right side connections are now active allowing you
to use the EQ on any external souse while the preamp
remains available on the left bay.
