Lacerta FMC, User Manual

Page: 11 / 17

Settings of the ASCOM driver:
Choose Lacerta MotorFocus on the ASCOM Focuser Chooser drop-down panel in
your compatible software (MaximDL, APT...).
If the port was chosen previously, the device can be connected by pressing the OK
button. For device parameters press the properties button.
The serial port of LACERTA FMC can be selected in the COM port drop-down
menu. When the connection is created, parameters are loaded from Eeprom. After
parameter modification click the „Save to device” button to write changes into the
Controller. After successful uploading, you will receive feedback at the bottom of the
window. Then we can access the ASCOM Chooser window.
LACERTA FMC 11 2022