LACAVA LLC
3
Installation Instructions
2. In order to provide proper support for wall-mounting a stone sink, it's usually necessary to remove a small section of
drywall so you can access the wall studs and attach blocking between them.
3. Based on the sink’s dimensions and mounting height, decide where support will be needed. Then remove
drywall in that area and install 2-by-8 blocking between the wall studs. Then using 3 1/2” galvanized
common nails, toenail the blocking to the studs and repair the drywall.
4. Attach the frame bracket to the wall by drilling min. four screws through the metal bracket directly into the studs
or reinforced wall.
1. The stone sink requires a stainless steel frame bracket # 5302-BR for installing on the wall.
23”
4”
10”
9 1/4”
Additional stud (at least 8"wide)
to span across vertical studs
Screw through pre-drilled holes
to horizontal and vertical studs
Additional holes in metal bracket
may be required for additional
screws
13”
8”
13”
16”
27”
4”
46 5/8”
additional holes
to be drilled
along bar to
catch wall studs
47 5/8”
23”
