LACAVA
4
Installation Instructions/Instrucciones de Instalación
1. Screw the base (1) onto the supply pipe flush to the
finished floor and mark position of the mounting holes.
2. Unscrew base, drill holes in the floor and install Fischer
screw inserts proper for the floor type (recommended
not included).
3. Screw base back onto supply pipe using teflon tape
and secure to the floor with screws.
4. Unscrew ring-nut (3) from base (1) and insert the spout (2)
into the base.
5. Position the spout in the desired orientation, slide the
ring-nut (3) over the spout, and thread it down to secure the
spout in the base.
6. Now, taking care not to scratch the spout carefully slide
the base cover (4) over the spout and flush to the floor.
7. If installing faucet 13016F.1 or 13016FL, proceed to the wall
valve installation.
3 x anchors
3 x Ø 5/16”
Fischer screws
F 1/2”
supply pipe
1
2
3
4
1
