LACAVA
3
Hand-Held Shower Heads Installation
1. Remove the existing shower head by
turning it counterclockwise at the wall union connection.
2. Clean the wall union’s threads from
any sealant or plumber’s tape used previously.
3. Flush the wall union from any debris for several seconds.
4. Wrap the threads 3-4 turns clockwise on the wall union.
5. Screw the hose onto the new shower head clockwise and
then the other end of the shower hose onto the threaded
portion of the wall union by hand.
Wrap the wall connection with protective tape and tighten
1/4 turn with a wrench if necessary.
IMPORTANT: DO NOT OVERTIGHTEN.
Check for leaks.
M 1/2"
HOSE
SHOWER HEAD
FILTER/
FLOW REDUCER
BACKFLOW PREVENTER
(inserted inside)
WALL UNION
TEFLON TAPE
WASHER
WASHER
