USER’S MANUAL
USER’S MANUAL
CERAMIC HOB
Radiant Electric ring:
Hotplates must ALWAYS be kept dry. Wipe your pans before placing them on the hotplates.
Limescale can be removed by using white wine vinegar. Cover the marks with a cloth soaked in wine
vinegar and leave for 1/2 h before carefully rinsing and drying.
Marks made by metal or superficial deposits which remain after the standard cleaning described
above can be removed by using a liquid product for cleaning stainless steel pans (e.g. cream
stainless steel ZIP ®, stainless steel PPZ ®, etc.).
The stainless steel frame can be cleaned by using a damp sponge with a mild detergent for stubborn
marks (e.g. CIF Ammoniacal ®, etc.).
If any sugar-based syrup falls on the glass ceramic hob during use, leave the element switched
to position 1, and, using a razor blade scraper (such as CERA Quick) IMMEDIATELY remove the
remaining burnt-on layer.
CAUTION
If there is any visible sign of a surface crack, immediately isolate appliance from the electrical
supply to prevent risk of electric shock. Contact your installer.
Body panels:
Y
ou can use special-purpose products for stainless steel (e.g. SUMAINOX ®, JOHNSON
STAINLESS STEEL ®, PPZ STAINLESS STEEL ®). Never use abrasive products.
CAUTION : Use NO chlorinated cleasers to clean this unit.
Before cleaning, shut off the gas supply and/or switch off
the electricity supply.
CLEANING AND MAINTENANCE
Do not clean this appliance with chlorinated products.
Read carefully the warnings and directions of use of the products
you use for cleaning and maintaining the appliance. Observe all
directions of use.
Use:
Select the control knob for the chosen radiant heater; the adjacent indicator
light is switched on.
Single heater:
Depending on quantity, start cooking at setting 6, and
reduce to a lower setting depending on the type of
cooking.
As reference, recommended settings:
1 & 2
= Hold or reheat prepared dishes.
3 & 4
= Simmer or steady cooking.
5 & 6
= Seal the food.
Double heater:
Set the control knob at setting 10; when the heater
starts to radiate, turn to the setting required for the dish
being prepared.
For maximum power from the double heater, turn the
control knob to MAXI.
For total control of this heater, turn back (settings 1
to 10).
To switch off the additional radiant element, turn back
to setting 0.
Advice:
Use cooking vessels with flat and smooth bottom to avoid scratching the glass plate.
Choose a size of vessel suited to the needs. The bottom diameter of the vessel must be the same
as or slightly larger than the marking printed on the glass plate.
D
o not leave and empty enamelled or aluminium vessel on a heater.
D
o not leave packaging material over aluminium directly on the glass plate; this could cause
permanent damage to the appliance.
A
void spilling sugar or syrup; remove them immediately if they occur, otherwise they could
cause small burst with projections of particles.
Multicooker
Chargrill
Electric fryer
Gas burners
Induction
Ceramic Hob
Plancha
16
