Lacanche Cormatin User Manual Download Page 4

USER’S MANUAL

Stainless steel bodied Cookers :

Use special stainless steel cleaners (ZIP INOX®, JOHNSON INOX®, PPZ INOX®, for instance). Do 

not use abrasive cleaners.

Stainless-steel hop :

The entire hob is pressed or comprises pressed recesses for easy cleaning and improved hygiene 

(no water trap). The hob should be cleaned with liquid, non-chlorinated products to avoid scratching 

the steel.
If the hob is stained use a clay stone- and soap-based paste available from department stores.

Brushed Stainless-steel trim :

The brushed stainless-steel trim should be cleaned with aerosol products available from department 

stores. You should nevertheless choose a cleaner that contains only a small quantity of silicone to 

avoid leaving white streaks after the product dries.

Brass trim :

Use a special brass-cleaning product (e.g. MIROR

® 

or

 

BRASSO

®

) and a soft cloth. If the product runs 

onto the enamel do not rub (these products generally contain abrasives). Rinse immediately with 

clean water without rubbing. 
Another solution is to use solid soap (Pierre d’argent, Pierre d’argile) applied with a damp sponge to 

the zones to be cleaned.
This solution is also very effective for cleaning and bringing a shine back to brass or chrome surfaces.

Enamelled surfaces :

Use a sponge soaked in soapy water or a window-cleaning product but never scouring powder.
You can also use methylated spirit but only when the range is cold.

Ovens :

Be sure the power supply is disconnected and the ovens 

are cold.
Remove scales: Loosen the screw 

 with your hand. 

Slide the brackets a small distance upwards to disengage 

the bracket from the lugs 

.

Caution : To remove the brackets, be sure the brackets 

are locked 
on the lugs 

 before loosening the screw 

.

Clean the side panels with a non abrasive cleaning 

agent. Harsh cleaning agents should not be used. If you 

use such product, first remove the oven door seals and 

reinstall after cleaning.
Rinse and dry.

After cleaning, replace the back panel with the screws and the washers. Be sure you the screws 

are correctly screwed.

CLEANING AND MAINTENANCE

Four_statique - GB - Rév 00 - Modifié le : 20/01/2014                                            4/4

Reviews: