
VP SERIES – User Manual
7
2.
SAFETY RULES
General Information
Please read carefully this user manual before starting to use the instrument and follow its
prescriptions with the utmost care. This user manual is part of the delivery, hence must be
always kept together with the instrument on its working place.
It is imperative that every person operating with this system has read and fully understood this
manual. The non-observance of the instructions contained herein or improper use may involve
damages/injuries that are not covered by product liability.
Never place the unit in a location where excessive heat, moisture, or corrosive materials are
present.
The unit construction provides extra protection against the risk of electrical shock by grounding
appropriate metal parts. The extra protection may not function unless the power cord is
connected to a properly grounded outlet. It is the user’s responsibility to assure a proper
ground connection is provided.
Observe all warning labels and never remove therm.
Never operate damaged or leaking equipment.
Never operate the unit without fluid in the bath.
Never operate equipment with damaged power cords.
Pay attention to the thermal expansion of bath fluid during heating to avoid the risk of
overflowing.
Use suitable connecting tubes. Make sure that the tubes are securely attached.
Take care before drain the liquid out, be sure to cool it down below 40
℃
.
Always turn off the unit and disconnect the power cord from the plug source before performing
any service or maintenance procedure or before moving the unit.
It’s better to consult the Labtech Service Team before performing installation, operation,
maintenance, procedures other than those described in this manual may result in a hazardous
situation and may void the warranty.