Labrie OPTIMIZER 2007, Operator'S Manual

Page: 31 / 36

Part #: 90320 25
C
LEANING THE
H
OPPER OF THE
O
PTIMIZER
TM
For an efficient and safe performance of the different functions of the Optimizer TM , it is
necessary to daily clean the hopper area.
To clean the hopper area of the Optimizer
TM
:
1. Turn on the engine and the hydraulic system.
2. Open the hopper roof gate.
Figure 27. Hopper roof gate
3. Remove the tailgate safety pins.
4. Fully open the tailgate. A green light on the console turns on to prompt you about it.
5. Press and hold the green button on the console to move the packer all the way to
the end of its stroke.
Figure 28. Control console and packer on Eject position
WARNING
M
AKE SURE THE
O
PTIMIZER
TM
IS IN AN AREA WITH TOTAL CLEARANCE TO PERFORM
CLEANING AND MAINTENANCE
.
Hopper roof
gate closed Hopper roof
gate open
PACKER EXTENDED
(UNLOADING POSITION)
Tailgate
open light
Tailgate
switch
Green
button