Labrie automizer, Operator'S Manual

Page: 33 / 74

28 Safety
Figure 2-13 Parking brake sign
2.
Make sure that the body is completely unloaded.
3.
Switch off the hydraulic pump.
4.
Turn off the engine, remove the key from the ignition, store it in a safe and controlled area
(preferably on yourself), and tape over the ignition switch.
5.
Turn off and lock the master switch.
6.
Chock all wheels.
I
MPORTANT
:
The battery set of the A
UTOMIZER
TM
R
ECYCLER
is equipped with a master switch (see Figure 2-14) that
must be turned off.
Figure 2-14 Master switch
7.
Put an “O
FF
S
ERVICE
” tag on the driver’s wheel and on the front windshield.
8.
Use safety props to block any system that could move by gravity (open tailgate, etc.)
9.
Drain all air tanks.
10.
Verify and inspect any security device and/or mechanism to make sure that there is no bypass
and that they are all functional.