LABORIE Solar Blue, Service & Installation Manual

Page: 26 / 198

© 2008
– 2020 by MMS B.V.
25
2.6 Solar Blue on Pole with Integrated Laptop
The Solar Blue module and a laptop can be mounted on the Solar pole
(Ø38mm). LABORIE advises to use a safety module with this setup.
Figure 2.4 Solar Blue mounted on pole with integrated laptop
The installation procedure is as follows:

Assemble and install the Solar Blue module (see chapter 4), the Solar pole,
and the laptop. The assembly instructions for the Solar Blue module and
the laptop integrated on the Solar pole (Ø38mm) can be found in a
separate document (document code: 0075-MAN-099).

Install the LABORIE software (see the software installation manual
(document code 0075-MAN-092-EN)).

Install the devices as supplied with your system: remote control (chapter 5),
Bluetooth flowmeter (chapter 6), Bluetooth puller (chapter 7), or Luna
wireless Module (chapter 8).