How to Perform a Study
NXT Go Owner’s Manual, LBL-00145, MAN2030
30
How to Perform a Study
To perform a typical study, follow the instructions provided.
Running the Study
i)
ii)
iii)
iv)
Printing the Study Result (Optional)
3.1 Starting a Study
Ensure that the computer and printer are turned on.
Start the Synergy application, and login using your credentials. A successful login
will load the Synergy Main window. For information on how to login to the Synergy
application, refer to the
Ensure that all devices required for the study are ready (i.e. fully charged).
Refer to the
for instructions on charging the NXT
System modules.
Verify that all devices required for the study are connected to the NXT System
either via Bluetooth technology or USB cable. The Bluetooth Dongle NXT must be
connected to complete all studies available in Synergy.
a)
In the title bar of the Synergy software, click the
Settings
icon, and then
click
the
Device Manager
option; the
Device Manager
window will pop-up as shown
in the figure below.
Figure 17: Device Manager Window
b)
In the
Device Manager
window identify the Bluetooth Dongle NXT, Urocap NXT,
Roam NXT, Pump NXT, and UPP Puller NXT and verify each device is properly
connected as indicated by a green checkmark.
Status DRAFT Effective
