Measurement Program
Solar Blue User Manual
183
In the left column, you will see the channels that have been selected via the
Channels
button (see § 12.5.8). For each channel (signal) to be measured,
you must select the channel number.
In this example, P
ves
is measured on channel 1 of the Solar Blue module;
P
abd
is measured on channel 2; P
ura
is measured on channel 3; and
EMg is measured on the EMG channel (1) on the Solar Blue module.
You can use more than one Bluetooth flowmeter. By default, the Solar Blue
measurement system will use all connected or registered flowmeter(s) with the
Automatic selection
setting. You can also select one specific flowmeter.
When a flowmeter or puller is not used for a specific measurement (i.e.,
cystometry), you can use the
Not measured
option for that investigation. In
this case, the software will not try to connect to this Bluetooth device.
12.6 System Settings
On the main menu, choose
Settings > System settings
to display the
System settings
dialog box, as shown in Figure 12.17.
Figure 12.17
System settings measurement program
You can select some pages with settings by clicking the appropriate tab.
