Laboory LABOMAT DISC 1100P, User Manual, Page: 13 / 20

13
Product Introduction
Welcome to buy and use LABOMAT DISC 1100P. This machine features in easy operation, safe use and high cleaning
efficiency, suitable to hotel, office building, exhibition halls and other public place for cleaning of the carpets and floors as
well as low-speed polishing of various grounds. With a high cleaning efficiency, it can save much time for cleaning.
Thus, it is an important device indispensable for current machinery cleaning works.
Names and functions of all handles and buttons on the operating handle are shown as follow:
1. Control Handle: The power switch and its protective device are installed in the handle.
2. Angle Regulator and Safety Switch: If the Eccentric Ground Cleaning Machine is not used, it is allowed to lift the pull rod
of Angle Regulator for the convenience of placing the Eccentric Ground Cleaning Machine and saving space. At the
moment, the sharp fixing teeth of Control Handle loosen, and it is allowed to rotate the Control Handle to the position
perpendicular to the ground and then loosen the pull rod to fix the Angle Regulator vertically.
When the Eccentric Ground Cleaning Machine is operated or used normally, it is necessary to lift the pull rod of Angle
Regulator and rotate the Control Handle to an angle which the operator is accustomed to (about 45°With the ground) and
then loosen the pull rod to fix the Control Handle. When the Eccentric Ground Cleaning Machine start the cleaning work, it
is necessary to push the Safety Switch to the center while pressing the power switch handle. At the moment, the motor is
started and drives the cleaning brush to work.
3. Power Switch Handle: It is used to turn on or off the power switch.
4. Angle Regulating Rod: It is used to regulate and control the angle of handle.
5. Water Drain Knob: It is used to open the Water Tank and control the water level.
6. Power line and plug: They are used to connect the handle and the host machine.
The vater tank is a container used for storing water and detergent while the water level regulating rod can regulate the flow
of water or detergent. LABOMAT DISC 1100P consists of surface cover, motor, driven rubber gear, Disc and Cleaning
brush.
Main Structure
1. 0perating handle
2. Letf switch handle
3. Right switch handle
4. Red fused switch
5. Angle adjustment lever
6. 760 Square Tube
7. Water tank
8. Drain knob
9. Main power wire
1O.Drain pipe
11.Foot wheel
12.Cover
13.Main motor
14.Disc
15.Bumping Ring
BASIC INFORMATIONS