Labomed Prima Mu, User Manual

Page: 24 / 37

6210000-795
Issue 1.2
Printed on: March 2016
Prima M
21
o
Protect the microscope from oil and grease. Never oil or grease the guide surfaces or mechanical parts.
o
Remove coarse contamination using a damp disposable cloth.
o
Use disinfectants based on the following ingredients: aldehydes, alcohols, quaternary ammonium
compounds.
o
Camera:
Clean
optical components using a lint-free cloth. Soak the cloth using a little methanol or glass
cleaner. Do not use ethanol and spirit.
o
Do not clean products
and
optical components in a cleaning/disinfecting device or ultra sound bath.
o
LABOMED MaxLite coatings are
fungal
resistant. If you clean as described above, the coatings will
not be damaged.

Occupational safety and health protection:
Observe work safety and health protection of persons responsible for processing contaminated
products.
Current regulations of hospital hygiene and prevention of infection must be observed in the
preparation, cleaning and disinfection of the products.
Instructions
•
Workplace:
Remove surface contamination with a paper towel.
•
Reprocessing:
Recommended: reprocess a product immediately after use
or as & when required as per below
cleaning instructions
.
•
Cleaning& Servicing:
Needed: water, detergent, spirits, microfiber cloth
o
Take a Linen or any soft cloth. Moist it slightly with running tap water
(<40 ˚ C), using a little
detergent
and clean the metallic and plastic parts.
o
C
lean
all
optical components
with spirits or alcohol
.
o
Dry optical components using a microfiber cloth; dry the rest of the product using a paper towel.
o
For s
ervic
ing
as and when required
,
inform LABOMED after – sales service department.
•
Autoclaving:
The rubber caps, sleeves and grips
supplied by labomed are
recommend for the following program
for autoclaving:
Temperature:
Time:
Instrument: 134° C
10 minute
Standard, Autoclave

Tropical environment/fungus:
LABOMED employs certain safety precaution in its manufacturing techniques and materials. Other
preventive measures include:
o
Keep optical part clean.
o
Use and store them in a clean environment only.
o
Store under UV light when not in use.
o
Use in continuously climate-controlled rooms only.
o
Keep moist
u
r
e
away
using
silica gel
and cover with a plastic cover
.