eVO 300
SETUP (continued)
12
8126200-795
eVO 300
Issue 1.1
Printed on April,2016
UNPACKING AND INSTALLATION (continued)
Set Up of Camera (CCD / HD CCD Camera)
1. Remove the Check Nut from the Inlet Tube for CCD Camera
shown as (A)., Refer Figure. 12.
2. Fix the Lens Adapter by rotating it Clock wise to the Inlet
Tube for Camera shown as (B)., Refer Figure. 13.
3. Remove the Dust Cover from the Camera and fix the Camera
by rotating it clockwise into the Lens Adapter. Shown as (C).,
Refer Figure. 14.
4. Plug in the video cable into the Analog video Connector.
Shown as (E)., Refer Figure. 15.
5. Plug in the Power Connector into the Camera Power inlet.
Shown as (F)., Refer Figure. 15.
6. Connect the Video Cable into The TV/LED Video in Port to
Live streaming.
Note:
To Align the Image on Camera with Image in Eye
Piece.
1. Loosened the Groove Allen Screw by using 1.6mm Allen Key.
Shown as (D). Refer image 14.
2. Rotate the Camera to align the image on camera, once set
then tighten the Groove Allen Screw
A
Figure 12
B
Figure 13
Figure 14
C
D
E
Figure 15
F
3
3
3
