BA_080_en_2022-01_11.02 Pressure transmitter PASCAL CV4
Page 9/24
6.2.4
Display layouts
You can configure the layout of the measured value display as well as the displayed infor-
mation individually. There are four different layouts available:
Designa-
tion
Layout
Description
Example
Four val-
ues
Under the main value, three additional
values are shown. The 4th value can
use the entire display width.
Three val-
ues
Under the main value, two additional
values are shown. Both of them can
use the entire display width.
Two val-
ues
Two values are shown in the same
size, one under the other.
Large dis-
play
The main value is shown at the maxi-
mum size (best readability from a dis-
tance). One additional value can also
be shown.
Table 4: Display layouts
You can define what information shall be shown in the layout’s placeholders.
You can select the 1st value (main value) from the following data:
1. Pressure with the selected unit
2. Pressure in per cent of the measuring range
3. Pressure in milliampere
For all further values, you can additionally choose from the following data:
Bar graph
Sensor temperature
Device ID (see 6.4.9.1)
HART tag
HART descriptor
When information (such as the device ID) cannot be displayed in a short layout placeholder,
"###" appears on the screen. Then select another layout or assign the value to a longer
layout placeholder.
You can configure the screen mode in the menue "Display" submenue "Screen mode" (see
6.4.4.2).
