Instruction manual for CoolSafe
01012016QA01
Item No. 700636
CopyRight © 2016
Page
31
of
35
In the third step, water that is strongly bound to the solids of the sample (called sobbed
water) is converted to vapour and removed from the product, this process being referred to
as de-sorption. Removing moisture in the de-sorption phase or secondary drying phase, is
done at a higher product temperature and at the lowest possible pressure
11
Technical Specifications
11.1
CoolSafe -55 °C
CoolSafe Touch 5 5 - 4
Unit
Part no: 700047
Digital read-out of temperature
Yes
Digital read-out of pressure
Yes
Ultimate temperature at 20°C room temperature
°C
-55
Power requirements
V/Hz
230/50-60
Power consumption
W
500
Insulation
mm
90
Condenser capacity
kg
3
Condenser capacity per 24 hours
kg
2,5
Total volume of Condenser
L
4
Weight net
kg
40
Cabinet dimensions (DxWxH)
mm
500x400x520
Cabinet material
Polyester coated steel
Condenser material
Stainless steel AISI 316
Cooling media
R 507
Vacuum Valve
Electric
Drain tap
Yes
Touch screen for control options
Yes
USB port for LaboGene software/SD card for data
Yes
CoolSafe Touch 5 5 - 9
Unit
Part no: 700051
Digital read-out of temperature
Yes
Digital read-out of pressure
Yes
Ultimate temperature at 20°C room temperature
°C
-55
Power requirements
V/Hz
230/50-60
Power consumption
W
600
Insulation
mm
50
Condenser capacity
kg
7
Condenser capacity per 24 hours
kg
4
Total volume of Condenser
L
9
Weight net
kg
45
Cabinet dimensions (DxWxH)
mm
500x400x520
Cabinet material
Polyester coated steel
Condenser material
Stainless steel AISI 316
Cooling media
R 507
Vacuum Valve
Electric
Drain tap
Yes
Touch screen for control options
Yes
USB port for LaboGene software/SD card for data
Yes
CoolSafe Touch 5 5 - 1 5
Unit
Part no: 700055
