LABOGA – The Beast 30 Plus
REAR PANEL
Combo:
Head:
1. Main fuse integrated with mains
power supply socket
Slo-Blo fuse T1,25A is in
the case, integrated with
power supply socket.
There is one spare fuse
included.
HINT
: Take out the
power cord during a
storm or when unused.
HINT
: While changing the fuse, make
sure the blades of the fuse socket are
properly installed.
ATTENTION!
Before you change
the fuse, always unplug the
amplifier from the power outlet.
ATTENTION!
Always change the
fuse for one of the same value.
2. Socket double button footswitch
TRS jack socket, which controls the
channel switching. Use a double button
footswitch with ”stereo” cable – check
description on front panel
Channel
and
Crunch for more details
. Inserting a
plug into this socket, brakes internal
connection in the amplifier, which
bypasses the front-panel channel
switches.
3. Return socket
Effects loop return socket with
switchable level. Plugging any jack in
the socket, brakes the amplifier's
internal connection between preamp
and power amp. Therefore it can be
used also as a power amp input with
line level (+4dB) or instrument level (-
10dB) signal, so you can plug here the
alternative preamplifier, including a
simple stomp box.
4. Effects loop level switch
It switches the signal level in the
effects loop between -10dB (instrument
level) and +4dB (pro line level).
5. Send socket
Effects loop send socket with
switchable level. Plugging any jack in
the socket, brakes the amplifier's
internal connection between preamp
and power amp. Therefore it can be
used also as a power amp input with
line level (+4dB) or instrument level (-
10dB) signal, so you can plug here the
Page
8
Spare
fuse
Main
fuse