Labo K Effects Fuzzy Lady, Manual

Page: 10 / 11

Labo
★ K
Effects – www.labo-k-effects.com – contact@labo-k-effects.com 10
troubleshooting
STAGE 1
No sound comes out of the device:
§
Verify that all your equipment works without the pedal.
§
Insert the pedal into the chain.
§
If the sound comes out in by pass mode, go directly to the stage
2.
If the sound does not comes out either in by pass mode, nor in effect
mode, go directly to the stage 4
STAGE 2
No audio ouput when the device is switched on :
§
Verify that the output volume is not in zero position.
§
· If the light shines correctly go to the stage 4.
STAGE 3
If the light shines weakly or not at all and the sound is weak and very
distorted:
§
Change the battery or verify the connection of the power cable.
STAGE 4
Your device is broken:
§
Contact Labo
★
K Effects by mail