Instruction Manual |
3
4.0 Getting Started
4.1 Unpacking
The package includes:
Labnet Excel™ electronic pipettor
Battery
Battery installation guide
AC/DC power adapter
Hanger with sticker
Pipet tips (sample non-filtered pipet tips:
1 x 10 µL, 1 x 200 µL, 1 x 1000 µL)
Quick start guide
Instruction manual
Calibration report
If any items are missing, damaged, or incorrect, please contact your distributor or sales representative.
NOTE:
Charge the battery before first-time operation.
4.2 Inserting the Battery
Remove the battery cover by pressing the battery cover latch and moving the cover outward (Figure 1). Plug in the battery connector
and insert the battery (Figure 2). Close the cover of the battery compartment. Press the Reset button to power on and calibrate the
Labnet Excel electronic pipettor.
NOTE:
After a charged battery is inserted, the Labnet Excel electronic pipettor will automatically perform a calibration routine.
Figure 2.
Insert the
battery connector into
the bottom right recess
first, then place the
battery into position.
Figure 1.
Open the
battery cover.
4.3 Charging the Battery
Attach the included AC/DC power adapter to the pipettor to charge the battery.
Insert the battery into the battery compartment. Insert the DC-in plug of the power adapter into the DC-in jack (Figure 3). Connect the
power plug into the external power source.
NOTES:
Connecting the power plug before inserting the battery will inactivate the charging process.
Labnet Excel™ electronic pipettors can be used during charging.
Do not over-charge the battery for a long period of time.
Do not insert or remove the battery during the charging process, as this may cause battery or PCBA damage.
The indicator bar inside the battery symbol (
) will blink during the charging process. When the battery is fully charged (
),
the blinking will stop and the Labnet Excel electronic pipettor will beep once.
Figure 3.
Connect the
AC/DC adapter to
charge the battery.