16
6.2.
Dispensing Speed
1.
The “Dispensing Speed” symbol should now be flashing.
2.
Press
«Up/Down» to change the aspirating speed ( : Slowest, :
Fastest).
3.
Press
«SET» to confirm the speed selection and move to the
“Audible Signals” function setting.
6.3.
Audible Signals
1.
The “Audible Signals” symbol
should now be flashing.
2.
Press
«Up/Down» to select the preference (
: On,
: Off).
3.
Press
«SET» to confirm the selection and move to the “Tip
Ejection Alarm” setting.
6.4.
Blow-out
1.
The “Blow-out” symbol
should now be flashing.
2.
Press
«Up/Down» to select the preference (
: On,
:
Off).
Please refer to Section 4.2 for the definition of “Audible Signals”.
The automatic blow-out function, in different pipetting modes, simulates
the blow-out function in manual pipettes.
To avoid the leftover final droplet
in tips, the blow-out setting is recommended in all protocols.
The blow-out
setting will not be performed in “Reverse Pipetting” setting.
