Instruction Manual – 3
A. Pipetting pushbutton:
Consists of 2 parts:
the pushbutton (A1) and the knob (A2).
B. Volume adjustment knob:
Used to set the volume.
C. Shaft:
Manufactured using high quality plastic,
ensuring high chemical and mechanical strength.
D. Tip ejector:
For multi-channel pipettors, the tips are
ejected sequentially, reducing the required force.
F. Shaft nut
N. Ejector pushbutton
R. Multi-channel manifold:
Contains a set of plungers
and a set of flexible-suspension shafts, which function
to reduce the force required to attach the tip.
Model Identification
The volume range of the pipettor is shown on the
pipetting pushbutton.
4. Safety Recommendations
Long-term use of the pipettor relies on correct method of use.
Please read and follow the instructions for use carefully.
Symbols used:
Danger, risk of injury.
NOTE
Risk of damage to the pipettor or errors in pipetting.
NOTE:
• The pipettor is designed for the transfer of liquids only
using the tip. Do not aspirate liquids without the tip
attached. The aspirated liquid should not enter the
pipettor, as it may cause damage.
• Single-use tips reduce the risk of contamination of
samples.
• Keep the pipettor clean, avoiding the use of abrasive or
corrosive cleaning agents (e.g., acetone).
• Keep the pipettor upright when there is liquid in the tip.
• Only using the pipettor in accordance with the
manufacturer’s instructions ensures the correct pipettor
parameters are maintained.
