Warranty
Labnet International guarantees that the Model 25/25D Benchtop
Rocker you have received meets its published specification. The
Model 25/25D Benchtop Rocker is guaranteed to be free of defects in
materials and workmanship for a period of one year from the date of
purchase. This guarantee is valid only if the unit has been used in
accordance with the instructions in this manual and for its intended
purpose. Labnet International shall not be responsible for consequen-
tial damages or damages resulting from the abuse or misuse of this
equipment. Labnet International’s liability shall be limited to the repair
or replacement of the unit or refund of the purchase price, at Labnet
International’s discretion.
In the event that service is required, Labnet International’s Service
Department must first be contacted to receive a return authorization
number.
Labnet International reserves the right to alter the specification of the
Model 25/25D Benchtop Rocker without notice. This allows the in-
corporation of improvements as they are developed.
Please fill in the following information. This information will be re-
quired in the event that service becomes necessary.
Serial Number
_________________________________
Date of Purchase
_______________________________
2
Specifications
Shaking speed
0 to 40 tilts per minute
Operating Environment
4º to 80ºC
Platform Dimensions
280 x 200mm
Rocking Motion
Fixed, ±7°
Maximum Load
5kg (11lbs)
Clearance between platforms
89mm
(Double platform unit only)
Voltage Requirements
120V/60Hz
Unpacking and Installation
Upon receipt of the Model 25/25D Benchtop Rocker, examine the
exterior carton for damages. In the event of shipping damage, a claim
must be filed with the transportation carrier within 10 days.
Carefully unpack the unit and check for completeness. Included in
the carton should be the following:
Rocker with platform(s)
Instruction Manual
Warranty Card
If any of these items are missing, contact Labnet International’s Cus-
tomer Service Department immediately.
Save the original packaging until the unit has been shown to be oper-
ating properly.
Verify that the unit is rated for the proper voltage by checking the
panel on the back. Check that the proper power cord has been re-
ceived. The serial number is also found on the back panel. Make
note of the serial number in the space provided in the Warranty sec-
tion of this manual.
The Model 25/25D Benchtop rocker should be located on a level,
stable surface near a grounded electrical outlet. Allow sufficient clear-
ance on all sides of the unit, at least 3 inches, for proper ventilation.
Ensure that the platform will not touch other objects while in opera-
tion.
If the unit is supplied with an optional upper platform, it should be
installed at this time. To install the platform, separate the platform
standoffs into their three pieces - screws, leg and mount knob. Insert
3
